产品特点

  1．降低脱模阻力，有效降低脱模时沙芯的变形。

  2．喷涂一次可重复使用，在芯盒内腔上积垢量少，易清理。

  3．安全性、环保性较强，对环境，人体使用安全。

  4．润滑作用显著，延长模型使用寿命，使得铸造成品率更高

  5．高闪点产品，使用方便，无火灾危险

使用方法

1．先清理芯盒模具。

2．把搅拌均匀的脱模剂用喷枪或毛刷喷(刷)在芯盒内腔、定芯棒等表面上。

3．喷雾应细而均匀，在保证脱模效果的前提下应尽量少喷(刷)，否则模型会有积垢，影响砂芯(型)尺寸精度。

CharacterlstlCS：

1．Reduce demoulding resistance，effectively reduce the deformation of sand core when demoulding

2．Spraying once can be reusedl in the core box cavity on a small amount offoulingf easy to clean

3．Safety,environmental protection，environmental，human use safety．

4．The lubrication effect is significant,prolong the service life of the model，and make the casting yield higher

5．High flash point products，easy to use，no fire hazard．

Usage：

1．First clear the Core box mold

2．The mixing of the release agent with a spray gun or brush coated in the core box cavity，fixed mandrel and other surfaces．

3．Spray should be fine and uniform，in order to ensure the release effect of the premise should be as little as possible spray(brush)．otherwise the model will have fouling，the impact of sand core

  dimension accuracy．